Automatic Watering Timer G3/4 Female Thread Programmable LCD Display Digital Irrigation Water Timer

Feature: 1. Programmable: Watering timer can be set to be on for a maximum of 599 minutes at intervals of 1 to 30 days. And 8 timing control programs can be set. Support smart on, with unlimited duration of temporary on function. 2. Large Display And Waterproof: The automatic watering timer adopts a large LCD display, which is convenient to view the set data. The battery compartment has a waterproof gasket design, plus a switch buckle to fix the battery compartment for reinforcement. 3. Filter And Rain Sensor Design: The threaded connector to the faucet has a filter design, which is easy to use without clogging and makes the controller last longer. When the rain sensor is triggered, it automatically stops the current task, easy to use. 4. Two Kinds of Thread Interface: This watering controller itself G3/4 female thread is also equipped with G1/2 adapter, easy to connect the use of two thread caliber faucets. 5. Easy To Install: No tools required, just install the irrigation water timer on the faucet, easy to use and simple to operate. No need to worry about your plants, lawn, garden or farmland when you are on a business trip, weekend vacation or visiting friends or relatives. Specification: Item Type: Watering Timer Material: ABS Product Size: Approx. 150 x 92 x 47mm / 5.9 x 3.6 x 1.9in Gross Weight: Approx. 318g/11.2oz Controller Thread: Female G3/4 Adapter Thread: G3/4 Male Thread to G1/2 Female Thread Use: Cooling, watering, landscaping. This product is suitable for courtyard, balcony, home green wall, three dimensional greening micro sprinkler, drip pipe, seepage irrigation automatic control products. 1. Battery (without battery delivery): Use 2 AA alkaline dry batteries. 2. 8 timer control programs can be set. 3. Can set the maximum opening time 599 minutes, interval 1 to 30 days. 4. Use large LCD display. 5. With unlimited duration of the temporary open function. Remarks: Suitable for water pressure 1-8kg, flow rate 500-1700L/H, suitable for water temperature 1-50 celsius . Setting Steps: 1. For initial setup, press the Menu Off key to enter the Current Time setting. Use the UP or DOWN key to set the hour, press OK, then use the UP or DOWN key to set the minutes. Press OK again to confirm and finish setting. 2. Automatically enter the Watering Start setting. Use the UP or DOWN key to set the hour, press OK Set, then use the UP or DOWN key to set the minutes. Press OK Set again to confirm and finish setting. 3. Automatically enter the Watering Duration setting. Set the watering time from 1 second to 599 minutes (maximum 9 hours 59 minutes) using the UP or DOWN key. Press OK to confirm the setting. 4. Automatically enter the Interval Days setting. Set the watering frequency from 1 day to 30 days using the UP or DOWN key. Press OK to confirm the setting. 5. For manual watering, press Manual, then use the UP or DOWN key to set the watering duration. Press OK to confirm. To stop manual watering, press Menu Off to switch back to automatic mode. 6. In the full screen without setting state (the relevant settings without flashing), press "UP" or "DOWN" to view "P1" to "P8" 8 timing procedures at any time press "Confirm" to set the timing. Press "UP" or "DOWN" to view "P1" to "P8" 8 timer programme at any time, press "Confirm" to set the timer. At the same time long press the "UP" and "DOWN" key, can close/open the child lock function, the lock icon appears, that is, the child lock function has been opened, the icon disappears, that is, the child lock function has been closed; at the same time long press the "UP" and "DOWN" key, can close/open the child lock function; at the same time long press the "UP" and "DOWN" keys at the same time, you can turn off/on the rain function, the rain icon appears to indicate that the rain function is on, and the rain icon disappears to indicate that the rain function is off.. Package List: 1 x Watering Timer (Battery Not Included)1 x Adapter 1 x User Manual Note: After manual unlocking, wait for 3 seconds before operating. 1. Due to the different water requirements of plants in each season, it is best to reset the irrigation program for each season to adapt to the water needs of the plants.2. Due to impurities in tap water, there is a stainless steel filter inside the connection, which needs to be cleaned in time to avoid blockage.3. This product is not freeze proof. Below 1 celsius , please dismantle it and pour out the internal water for storage. It cannot be used if frozen and cracked.4. It must be installed upright in the front and cannot be installed upside down or horizontally.5. In the full screen without setting state (no flashing of relevant setting items), press UP or DOWN to view P1 to P8 8 timer program at any moment, press OK to set the timer. Press and hold down the UP and DOWN keys at the same time to turn off on the child lock function, the appearance of the lock icon indicates that the child lock function has been turned on, and the disappearance of the icon indicates that the child lock function has been turned off; Long press the UP and DOWN keys at the same time to turn off on the rain function, the rain icon appears to indicate that the rain function has been turned on, and the disappearance of the rain icon indicates that the rain function has been turned off.6. Manual measurement, please allow some errors.