Cold Weather Jacket Made with 200g of American Super warm with aluminum Treated with Teflon fabric protector for water stain oil cold weather black x

---------------------------------------------------------------------- 3M(TM) Thinsulate(TM) High-performance filling material Thinsulate(TM) High-performance filling material is a "thin and warm" filling material developed by 3M(TM). It has 1.5 to 2 times more heat retention than regular polyester cotton. This jacket uses the maximum amount of this high-performance filling at 200g. In a typical padded jacket, the sleeves often have less padding than the body, but the sleeves are filled with the same 200g of padding as the body, providing the highest level of warmth. Also, unlike down, it is resistant to water, so it overcomes the weakness of down, which loses heat retention when it gets wet from rain or sweat. Teflon (TM) Fabric Protector The outer material is treated with a "Teflon (TM) Fabric Protector" that boasts high water repellency. The surface repels water, and the water on the surface does not soak into the interior, but rolls down like a bead. It is highly oil and stain resistant, so it is resistant to rain, snow, and dirt. Aluminum lining reflects heat The lining uses the same ``aluminum vapor-deposited fabric'' as thermal bags and thermal sheets. Aluminum's property of ``reflecting the heat emitted from the human body'' traps the heat without escaping it, creating a high level of heat retention. Windproof: Preventing cold wind from passing through is essential for protection against the cold. The outer material is made of windproof fabric. The test result was 0.3 based on JIS L 1096 woven and knitted fabric testing methods. Regular men's clothing is said to have 3 to 5 degrees of protection, so it has 10 to 16 times more protection from the wind. It closes gaps in clothing and prevents cold air from entering.The cuffs have Velcro and the hem has a drawcord to adjust the fit. It prevents wind and cold air from entering not only from the surface but also from gaps in clothing, creating a higher heat retention effect. From the outdoor brand LAD WEATHER, it can withstand any extreme cold. The strongest down jacket was born. The filling is 3M(TM) Thinsulate(TM) high-performance filling, which has 1.5 to 2 times more heat retention than regular polyester cotton. This is an American brand that is used for high-end outdoor items. I used it lavishly at the maximum amount of 200g per 1m2. The outer material is treated with Teflon, making it highly water repellent. Of course, there is no need to panic in case of sudden snow or rain, The Teflon coating is resistant to dirt and oil, so you can wear it without worrying about getting it dirty. The lining is coated with aluminum vapor deposition, which is familiar from thermal bags, etc. Reflects body heat, trapping it inside the jacket without letting it escape. No matter how cold the outside air is, no matter how harsh the weather is, Maintain a comfortable temperature inside your clothes. This is truly the ``strongest'' jacket.