Features:
Brushless motor has low interference, compare to brushed motors, there will be no spark generated when motor is running, thus greatly reduce electric spark interference to remote radio equipment.
Low noise, smooth operation, brushless motor has less friction force during operation, which is a great advantage for the stability of equipment operation.
Long service life and low maintenance costs, brushless motor is mainly abrasion on the bearing, and only need to clean dust when necessary.
Driver is compatible with motors that has or has no hall sensor, supports potentiometer speed control function, external 10V voltage speed control function, power onoff function, speed output function, alarm output function, CWCCW function.
Widely used in small appliances, electric tools, water pump, fan control system, etc.
Specifications:
Brushless DC Motor:
Working Voltage: 48V DC
Power: 500W
Speed: 12000rmin
Torque: 0.6N.m
Insulation Resistance: >2M Ohm
Dielectric Strength: 400V
Front & Back Cover Diameter: 5.7cm2.2in
Middle Diameter: 5.5cm2.1in
Chuck Length: 4.5cm1.7in(cutter bar part, including nut and core)
Chuck Diameter: 2cm0.8in
Motor Overall Length: 19.4cm7.6in (including fan, chuck and motor)
Spindle Radial Runout: About 0.010.03
Motor Driver(WS55220):
Voltage
2450VDC
Rated Current
12A
Current Limiting
About 14A
Max. Supporting Speed
20000RPM
Speed Control
1, Connect to external potentiometer;
2, Connect to external 10VDC voltage.
Speed Output
PG signal(there is a 5V speed pulse output
between this port and earth). If output frequency is P(Hz), motor pole number
is N, speed is F(RPM), then output speed frequency, P=F*N60
Alarm Output
ALM signal, there is alarm pulse output
between this port and earth
1.This port outputs 5V
high level when normal working;
2. When it is powered on, but speed control signal is quite low and
motor does not rotate, port signal is low level; that is to say, when EN
button is open, as long as motor does not rotate, alarm port signal is low
level, indicating the state is abnormal and need to be dealt with;
3. When it is undervoltage, overvoltage, stall, lacking phase or phase
short circuit, port signal is low level.
CWCCW
FR, external switch connects to FR port at
one end, and to earth at the other end; motor"s rotating direction can be
changed.
StartStop
En button, external switch connects to EN
port at one end, and to earth at the other end; motor starts when connect to
earth.
Stall Protection
Motor stops working when stalled, and starts
when powered on again
Power Light
Green light on when powered on
Indicator Light
Red light flashes once at intervals when EN
power on, potentiometer or external voltage not power on;
Red light flashes seven times at intervals when EN not power on and on
standby state.
Insulation Resistance
>100M Ohm (normal temperature and pressure)
Dielectric Strength
0.5KV, 1min(normal temperature and pressure)
Package Includes:
1 x Brushless Motor
1 x Motor Driver
1 x Clamp
1 x Potentiometer and Switch
Note:
1. Please allow small size error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3.
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.Brushless motor has low interference, compare to brushed motors, there will be no spark generated when motor is running, thus greatly reduce electric spark interference to remote radio equipment
Low noise, smooth operation, brushless motor has less friction force during operation, which is a great advantage for the stability of equipment operation
Long service life and low maintenance costs, brushless motor is mainly abrasion on the bearing, and only need to clean dust when necessary
Driver is compatible with motors that has or has no hall sensor, supports potentiometer speed control function, external 10V voltage speed control function, power onoff function, speed output function, alarm output function, CWCCW function
Widely used in small appliances, electric tools, water pump, fan control system, etc
