Chrome Foot Rest Pedal Cover for Cupra Formentor (Model Years 2021 and Later) Stainless Steel Footrest Dead Pedal Pad Cover

Chrome Foot Rest Pedal Cover for Cupra Formentor (Model Years 2021 and Later) Stainless Steel Footrest Dead Pedal Pad Cover

The Chrome Foot Rest Pedal Cover is manufactured using a special molding system specific to the compatible vehicle. This chrome product is made from A 304 grade stainless steel. It is ready for installation and is provided with high-quality double-sided acrylic adhesive tape.

» 100% Compatibility: Designed specifically for Cupra Formentor model years from 2021 - After » High-Quality Material: Made from 304 stainless steel, ensuring resistance to rust, cold and heat. » Easy Installation: Equipped with 3M double-sided tape, no additional glue, cutting, or drilling is required. Installation is simple and hassle-free.

Installation Instructions for Chrome Foot Rest Pedal Cover Preparation: » Install the Chrome Rest Pedal Cover in a dry and dust-free environment. » After removing the product from its packaging, perform a trial installation on the area where it will be applied, without removing the protective layer of the double-sided tape.

Surface Cleaning: » Thoroughly clean the surface where the pedal cover will be adhered using a cleaning liquid like alcohol. » Do not use liquids containing additives, such as wet wipes or gasoline, as they may affect adhesion.

Temperature Requirements: » The ambient temperature during installation should be between 15°C and 35°C. If the temperature is below 15°C, warm the surface with a hairdryer or a similar tool before installation to ensure the double-sided tape adheres properly.

Adhesion Process: » After removing the protective layer from the tape, you can use a hair dryer to gently warm the adhesive, which will enhance its bonding strength. » Once heated, carefully apply the strip to the cleaned surface in one motion. » Use a dry cloth to press firmly on the strip to ensure strong adhesion.

Aftercare: » Protect the applied product from water for at least 24 hours. » Avoid washing the area with high-pressure water for 48 hours to ensure the adhesive sets properly.